AGAR Floor Finish Sealer Satin and Matt

AGAR Floor Finish Sealer Satin and Matt – Commercial Protection Australia

AGAR Floor Finish Sealer is a commercial-grade protective coating developed for Australian cleaning professionals and facility managers. It enhances and protects resilient flooring surfaces under heavy foot traffic while integrating easily into structured maintenance programs.

Both variants share the same high-performance base formulation. The difference lies in the final appearance:

• Satin Finish (10L) provides a refined, soft gloss suitable for retail and commercial settings where a professional sheen is preferred.

• Matte Finish (5L) delivers a low-glare, natural appearance ideal for schools, aged care, healthcare and glare-sensitive environments.

The water-based formulation offers low odour during application, strong adhesion, and resistance to abrasion and routine cleaning chemicals. It reduces stripping frequency and extends floor lifespan when maintained correctly.

Suitable for:

• Vinyl composite tiles (VCT)

• Linoleum

• Sealed concrete

• Terrazzo

• Sealed timber flooring

Variant Comparison Table

Variant Logic:
These are true finish and pack-size variants under one formulation family. Only aesthetic finish and volume differ.

Key Features

• Commercial-grade floor protection

• Water-based, low odour formula

• Resistant to scuffing and abrasion

• Compatible with Australian maintenance systems

• Easy mop-on application

• Suitable for high-traffic environments

• Reduces long-term floor restoration costs

Technical Data (Typical Values)

• Appearance: Milky white liquid, dries clear

• Finish Options: Satin or Matte

• Coverage Rate: Approx. 40–60 m² per litre (surface dependent)

• Dry Time: 30–45 minutes at 25°C

• Recoat Time: Approx. 60 minutes

• pH: 8–9

• Dilution: Ready to use

• Application Tools: Flat mop applicator

• Shelf Life: 24 months (sealed container)

Safety Precautions

• Wear gloves and non-slip footwear during application.

• Ensure adequate ventilation during use.

• Avoid eye contact and prolonged skin contact.

• Do not mix with other chemicals.

• Refer to the Safety Data Sheet (SDS) before use.

• Keep out of reach of children.

Storage Guidelines

• Store in original sealed container.

• Keep between 5°C and 30°C.

• Protect from direct sunlight.

• Do not allow to freeze.

• Rotate stock using FIFO method.

Water Hardness Suitability

As a ready-to-use sealer, water hardness does not directly impact product performance.

However, during floor preparation:

• Ensure stripping and neutralising processes remove mineral residue.

• In hard water areas common across parts of Australia, rinse thoroughly before sealing.

• Residual calcium or magnesium deposits may affect adhesion if not properly removed.

Best practice: Always neutralise and rinse prior to application regardless of local hardness levels.

Storage, Maintenance & Operational Guidelines

Before Application

• Strip old coatings completely.

• Neutralise floor to remove alkaline residue.

• Ensure surface is clean and fully dry.

During Application

• Apply thin, even coats.

• Allow full drying between coats.

• Avoid heavy traffic during curing period.

Ongoing Maintenance

• Use neutral pH floor cleaners only.

• Avoid harsh alkaline or solvent-based cleaners.

• Periodic burnishing enhances satin finish appearance.

• Recoat as part of planned maintenance schedule.